It is recommended for deposit inhibition in industrial water systems like recirculating cooling systems, cooling towers, waste water streams facing deposition problems, paper mill applications etc.

Almost mineral scales can be inhibited by WS 7430 like Calcium Carbonate, Fe and Mn based scales, CaF₂ etc.

WS 7430 is suitable for use in waters containing high solids amounts, like scrubbers and paper mill applications.

Clear colourless to yellow

Density (kg/m ³ ) : 1120 -1240

pH : 4

Freezing point : < -4°C

These data are to be seen as typical values and should not be considered as specifications.

For most applications a continuous treatment level of 0.5 - 5.0 ppm of WS 7430 in the make-up water is acceptable. However, optimum dosage will depend on the nature and severity of fouling and the operational parameters of the system.

Wear suitable protective clothing, goggles and gloves.

WS 7430 is a mild skin irritant and moderate eye irritant.

In case of contact immediately flush with water for 5 - 15 minutes. After eye contact seek medical advice. Do no swallow. Before use review the Material Safety Data Sheet for additional information.

A.D.R. : Not classified

Symbol : Xi; irritating

R-phrases : 36/38

S-phrases : 26, 37/39